How should non-standard chains be cleaned and maintained on a regular basis?

How to Clean and Maintain Non-Standard Chains, Follow these key steps:

1. Avoid using strong acidic or alkaline cleaners (such as rust removers), as these chemicals can damage or even break the chain.

2. Never clean chains using solvent-based chain washers, as this method will absolutely damage the chain.

3. Avoid using organic solvents like degreasers, which not only harm the environment but also strip lubrication from bearings.

4. Clean your chain after every ride, especially after riding in rain or humid conditions.

5. Always use a dry cloth to wipe down the chain and its components.

6. If necessary, use an old toothbrush to clean between the chain links.

7. Also remember to clean the front derailleur and rear derailleur pulleys.

8. Use a brush to remove accumulated mud and grime from the chain links. If needed, use warm soapy water as an aid.